| PartNumber | TX26D50VM0BAA |
| Marca | KOE |
| mărimea | 10.4 |
| Aplicație | MD |
| Rezoluţie | 800×600 |
| Compoziţie | LCM |
| Luminozitate | 450 |
| CR | 800:1 |
| Culori | 16.7M |
| Iluminare de fundal | WLED |
| Interfață | TTL |
| marca panoului | HITACHI |
| model de panou | TX26D50VM0BAA |
| tip panou | a-Si TFT-LCD , LCM |
| dimensiunea panoului | 10.4 inch |
| rezoluţie | 800(RGB)×600 , SVGA |
| modul de afișare | IPS, Normally Black, Transmissive |
| Zonă activă | 211.2×158.4 mm |
| contur | 243×185.1 mm |
| suprafaţă | |
| luminozitatea | 450 cd/m² (Typ.) |
| Raport de contrast | 800:1 (Typ.) |
| culorile afișajului | 16.7M (8-bit), CIE193154% |
| timp de raspuns | 25 (Typ.)(Tr+Td) |
| unghi de vedere | 85/85/85/85 (Typ.)(CR≥10)(L/R/U/D) |
| frecvență | 60Hz |
| tip lampa | 3S8PWLEDEmbedded (LED Driver) |
| interfață de semnal | CMOS (1 ch, 8-bit), 40 pins |
| tensiune de intrare | 3.3V (Typ.) |
| aplicarea | MD |
| AA104XG12 | Mitsubishi | 10.4 | 1024×768 |
| CLAA104XA02CW | CPT | 10.4 | 1024×768 |
| DLC1040ABG-2 | Other | 10.4 | 800×600 |
| HT10X21-311 | HYDIS | 10.4 | 1024×768 |
| LM64C35P | SHARP | 10.4 | 640×480 |
| LQ10D341 | SHARP | 10.4 | 640×480 |
| LTM10C345 | TOSHIBA | 10.4 | 1024×768 |
| NL8060BC26-13 | NLT | 10.4 | 800×600 |
| PD104SL3 | E Ink | 10.4 | 800×600 |
| TX26D05VM1CAA | KOE | 10.4 | 640×480 |
| LAM170M023A | JDI | 17.0 | 1280×1024 |
| NL128102BM29-05A | NLT | 19.0 | 1280×1024 |
| NL160120AC27-32B | NLT | 21.3 | 1600×1200 |
| NL160120BM27-07 | NLT | 21.3 | 1600×1200 |
| NL204153AC21-22 | NLT | 21.3 | 2048×1536 |
| NL204153BM21-04A | NLT | 21.3 | 2048×1536 |
| R190EFE-L51 | Innolux | 19.0 | 1280×1024 |
| R196U2-L01 | Innolux | 19.6 | 1600×1200 |
| R213RFE-L01 | Innolux | 21.3 | 2048×1536 |
| R300M1-L01 | Innolux | 30.0 | 4096×2560 |